Trionic 20 Mil Tri-Polymer Non-Pigmented Chemical Resistant Cleanroom Gloves

Recommended Areas of Use

• Controlled Environment: Product and user protection

Instructions for Use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Unpack and put on the gloves according to the gowning procedure in the workplace.
• Inspect the gloves for any cracks and flaws before use.
• Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Do not touch the external side of the gloves when taking them off.

Storage Conditions

• Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.