Stansolv Knit Lined 33 Mil Nitrile Chemical Resistant Gloves, Green, 14"

Recommended Areas of Use

• Automotive/mechanical industry
• Part degreasing
• Automotive assembly
• Machine maintenance
• Laboratory tests
• Handling drums of chemical products
• Chemical product blending

Instructions for Use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to dithiocarbamates and thiazoles to use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage Conditions

• Store the gloves in their packaging protected from light and humidity.

Laundering Conditions

• Before taking off the gloves, clean them as appropriate:
  • in use with paints, pigments and inks: wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc.): rub over with a dry cloth
  • in use with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth.
• Caution: improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

• Ensure the inside of the gloves is dry before putting them on again.