115V Rotary Evaporator with Water Bath, & Glassware Set B

Specifications

• Operating ambient temp. range: 5-35°C
• Speed range: 5-315 rpm*³
• Evaporation capacity: Up to 23 ml/min
• RPM display: Digital display / Control knob
• Rotation mode: Forward/Reverse/Auto reverse
• Spring-loaded jack: Manual balance (Max. height 200 mm, stepless regulation, one-touch lock)
• Rotary motor: DC brushless (simple servo)
• Condenser retention: Condenser bracket
• Rotary evaporator
  • DC motor: Motor overload protection, overvoltage, low voltage, rotation speed sensor error.
  • AC adapter: Short circuit in internal circuit, overcurrent protection, overvoltage protection.
• Cooling condenser
  • Double corrugated tube (cooling surface: 0.143 m²)
  • Suction port: GL-14 (upper), Φ10 nozzle
  • Cooling port: GL14 (two places in lower part), two φ10 nozzles
• Compatible evaporation flask: 50-2000 ml. Use optional reducer to attach small flasks
• Compatible receiving flask: 100-2000 ml
• External dimensions*²: 529 x 324 x 745mm
• Overall dimensions*² (W x D x H): 554 x 365 x 745mm
• Power rating 50/60Hz: RE202: 100-115V 1A with plug. RE212: 200-230V single phase 1A no plug, round terminal.
• Included accessories
  • Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1)
  • Glass set: Cooling condenser (type B)(1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1), flask clip (1), vacuum seal (1), condenser insulation kit (1), condenser bracket (1) (for type B), hex wrench (1) (for type B)

_{*¹ Performance data above based on 23 ±5°C room temperature, 65%RH ±20% humidity, and no process load.
*² Dimensions excludes protrusions.
*³ Applicable rotation speed range and sample volume depend on the capacity of evaporation flask.}